{"id":4618,"date":"2023-11-20T03:52:00","date_gmt":"2023-11-20T03:52:00","guid":{"rendered":"https:\/\/skynetwave.com\/?p=4618"},"modified":"2023-11-20T03:52:02","modified_gmt":"2023-11-20T03:52:02","slug":"how-to-mount-starlink","status":"publish","type":"post","link":"https:\/\/skynetwave.com\/how-to-mount-starlink\/","title":{"rendered":"How To Mount Starlink: A Starter\u2019s Guide"},"content":{"rendered":"\n
Over 2 million Starlink users figured out how to mount Starlink to get an unobstructed view of the sky and get a clearer signal. <\/p>\n\n\n\n
Although the Starlink kit comes with a default tripod mount, there are <\/strong>better mounts<\/strong><\/a> that will give your dish more clearance. Try these mounts for different results:<\/strong><\/p>\n\n\n\n Roof mount – Minimal roof invasion or damage.<\/strong><\/p>\n\n\n\n J-mount – Versatility<\/strong><\/p>\n\n\n\n Flashing mount – For roof shingles<\/strong><\/p>\n\n\n\n Pivot Mount – For Starlink RV<\/strong><\/p>\n\n\n\n Tower mount – Best in places with heavy obstruction<\/strong><\/p>\n\n\n\n This guide provides the lowdown on residential users’ most effective mounting options.\u00a0<\/p>\n\n\n\n The roof mount is one of the best ways to mount Starlink<\/a>. You have two options for mounting your Starlink on the roof. Satellite installed on a roof.\u00a0<\/em><\/strong><\/p>\n\n\n\n You can mount the Starlink dish using the ridgeline on a sloped or flat roof. The aim of using a ridgeline mount <\/a>is to avoid penetrating the roof.\u00a0\u00a0<\/p>\n\n\n\n The location of your mount needs to be somewhere that allows easy cable routing into the house. We recommend picking a spot on the roof near any entry point, like a window.\u00a0<\/p>\n\n\n\n Switch off the power and unplug the Starlink dish cable from the router. <\/p>\n\n\n\n The ridgemount isn\u2019t that heavy. However, ensure you have secured the roof with roof jacks for your feet. Roof jacks give you somewhere to firmly place your feet on a sloping roof. <\/p>\n\n\n\n The non-penetrating roof mount has a center arm. Turn the knob to loosen the arms. <\/p>\n\n\n\n Sit the mount such that each side of the mount sits flush on the roof while the center rests on the ridgeline\u2019s peak.<\/p>\n\n\n\n Tighten the center arm controlling knob so your mount doesn\u2019t extend or contract by accident. <\/p>\n\n\n\n The ridgeline mount comes with ballast bags to keep the mount steady. Carry them up the roof and place two on each side of the mount. Ensure they cover all four corners. They are heavy enough to stay put against the wind. Add an optional DIY sandbag\/weight to hold out against heavier winds.<\/p>\n\n\n\n Using the shortest path to an exit point closest to the mount, place the cable against support structures where you can place cabling pins. Your cable will pass by the house\u2019s outer wall. Ensure the dish connector stays near the mounting site while the router plan stays near the house. <\/p>\n\n\n\n Create the shortest path between the Starlink router inside and the dish mount outside. Keep the wall undamaged.\u00a0<\/p>\n\n\n\n A technician laying cable in the house<\/em><\/strong><\/p>\n\n\n\n Cable clips provide neat work, and long cables. Ensure your cable bends in gentle curves only.\u00a0<\/p>\n\n\n\n Also, it might help if you route the cable through areas in the home with minimal movement. Low or high wall sections ensure your walls stay need clear of any wire eye sores.\u00a0<\/p>\n\n\n\n Carry your Starlink dish in its carrier bag to avoid damaging it. At this point, you should have run part of the cable up the mount\u2019s length. Slide the dish onto the mount\u2019s pole. You\u2019ll know it’s a snug fit when you hear a click. <\/p>\n\n\n\n Ensure the dish faces upwards at a slight angle and there\u2019s no shaky movement when touching the mount slightly.\u00a0<\/p>\n\n\n\n The final step is in your house when you reconnect Starlink to the router and run a speed test. <\/p>\n\n\n\n However, you can install the Starlink satellite on a roof with shingles. The best mount for this procedure is the flashing mount. <\/p>\n\n\n\n You must drill a J-mount or pivot mount into the flashing mount base to mount the Starlink dish. <\/p>\n\n\n\n A J-Mount on a wall siding<\/em><\/strong><\/p>\n\n\n\n Most mounts come with a standard 1.5\u201d diameter mast. However, you can buy an original Starlink pole adapter that fits the dish without ruining the clip or the cable.\u00a0<\/p>\n\n\n\n A J-mount is one of the most versatile mounts on the official Starlink site. Here are its standout qualities.<\/p>\n\n\n\n Follow this step-by-step guide to install a Starlink dish without damaging the roof. <\/p>\n\n\n\n The Starlink dish is self-aligning. However, ensure it faces the north if you are in the Northern Hemisphere. Since the dish has no default direction, use the app to ensure its first direction(Towards the North) has zero or minimal obstructions. <\/p>\n\n\n\n Afterward, Starlink will automatically align itself to the best position. <\/p>\n\n\n\n You don\u2019t need to self-adjust Starlink in any direction. The dish already has a vertical angling. Ensure the motors stay undamaged to get the best direction and angle every time. <\/p>\n\n\n\n Sure, Starlink comes with a default starter tripod stand. However, it would be best if you had a mount to get you clear satellite signals.\u00a0<\/p>\n\n\n\n Starlink has practical options for mounts. You might need a third-party mount, such as a tree or tower mount in heavily wooded areas. <\/p>\n\n\n\nWhat Is The Best Way To Mount Starlink?<\/h2>\n\n\n\n
Starlink operates best with a clear view of the sky. Therefore, your mounting should ensure the following.<\/p>\n\n\n\n\n
Here\u2019s how to install Starlink on the roof using a roof mount and a flashing mount.\u00a0<\/p>\n\n\n\nHow To Mount Starlink Dish On A Roof.<\/h3>\n\n\n\n
<\/figure>\n\n\n\n
Assess where to install the mount. <\/h4>\n\n\n\n
Unplug the Starlink dish.<\/h4>\n\n\n\n
Carry up your mount.<\/h4>\n\n\n\n
Loosen the mount\u2019s arm. <\/h4>\n\n\n\n
Position the mount. <\/h4>\n\n\n\n
Tighten the mount.<\/h4>\n\n\n\n
Secure the mount.<\/h4>\n\n\n\n
How to Run Starlink Cable Into The House<\/h3>\n\n\n\n
Route your cable.<\/h4>\n\n\n\n
Note: You are avoiding drilling any holes on the roof. However, you can drill a hole in the home\u2019s wall siding. <\/p>\n\n\n\nCreate a clear path in the house.<\/h4>\n\n\n\n
<\/figure>\n\n\n\n
Pin the cable.<\/h4>\n\n\n\n
Place the Starlink dish.<\/h4>\n\n\n\n
Installing Starlink On A Shingle Roof With A Flashing Mount<\/h2>\n\n\n\n
\n
How To Mount A Starlink Dish On A Wall<\/h2>\n\n\n\n
<\/figure>\n\n\n\n
\n
\n
Pick the right lag screws. (wood lag screws for wood surfaces and metal screws for brick and stone)<\/li>\n\n\n\nPlacing the Starlink dish on a Mount<\/h3>\n\n\n\n
\n
Which Direction Should Starlink Face?<\/h2>\n\n\n\n
(For context, The U.S. is in the Nothern Hemisphere)<\/em><\/p>\n\n\n\nConclusion<\/h2>\n\n\n\n